|
PressureJet offers
heat exchanger, condenser, evaporator tube
- pipe cleaning and ultra high pressure water jetting equipments for evaporator
tube cleaning, condenser tube cleaning, heat exchanger tube cleaning & various
pipe cleaning applications. PressureJet offers high pressure hydro jetting
system ranging from 100 bar to 2800 bar pressure consisting high pressure
reciprocating plunger pump. There are many advantages of using high pressure hydrojetting equipments over chemical cleaning, brush cleaning and several other
conventional methods.
Pump flow rate up to 700 lpm and pressure up to 2800 bar is available. For
requirement, please contact PressureJet.
ADVANTAGES OF WATER JETTING FOR TUBE CLEANING & PIPE CLEANING
Suitable to clean tubes of all material without harm, from brass to titanium
Inhibits corrosion and extends tube life by removing corrosive deposits from
inside of the tubes and tube pits. Cleans any length and diameter of straight or U-tube heat exchanger.
Extends maximum operating efficiency by removing fine layer of silt and organic
debris, which is missed by mechanical cleaning and leads to rapid refouling. Removes any foreign scale deposit.
Environmental safety - No chemical discharges or hazardous waste removal.
Custom designed cleaning nozzles, which offer full 360° inner diameter cleaning
without streaking tube. Multiple lance systems - up to 8 (or more) operators for fast cleaning of large
main condensers. Radiological waste minimization with the use of our positive shut off pressure
control systems. Cost Effective - restored baseline performance and extended refouling rates;
promptly recovers job expense (in exponential fashion).
Tube cleaning & pipe cleaning
is the process for cleaning and maintaining fouled
tubes. Chemical tube cleaning is required to remove deposits and obstructions,
which are caused by the liquids, which run through the tubing. The chemical tube
cleaning process can help prevent corrosion due to deposits, which can also
create tube failure.
Heat exchanger, condenser, evaporator tube - pipe cleaning is widely used in
various industries like textile, pharma, steel, chemical, refineries & many
other industries for different applications.
PressureJet has supplied many such high pressure waterjetting tube & pipe
cleaning systems in different industries in all over India & other countries
like South Africa, Malaysia, Philippines, Thailand, Korea, Iran, Saudi Arabia,
Brazil, Mexico, Israel, Indonesia & many more
However, you please go through the below mentioned chart where you will come to
know about the different range of flow rate, pressure and hp of different high
pressure water jet tube cleaning system.
|
|
Tube bundle before cleaning |
Tube bundle after cleaning |
|
|
|
|
|