You are at right
place for your requirement of tube
cleaning by hydrojetting.
PressureJet
offers
high pressure
pipe & tube cleaning
system and ultra high
pressure water jetting system
for evaporator tube cleaning,
condenser tube cleaning,
heat exchanger tube cleaning &
various pipe cleaning applications.
Pressure Jet offers pipe cleaning
equipment ranging from 100 bar
to 2800 bar pressure. There are many
advantages of using hydro jetting
over chemical cleaning, brush
cleaning, water pipe cleaning
and several other conventional
methods.
ADVANTAGES OF WATER JETTING FOR PIPE
& TUBE CLEANING
-
Suitable to clean tubes
of all material without harm,
from brass to titanium
-
Inhibits corrosion and
extends tube life by removing
corrosive deposits from inside
of the tubes and tube pits.
-
Cleans any length and
diameter of straight or U-tube
heat exchanger.
-
Extends maximum operating
efficiency by removing fine
layer of silt and organic
debris, which is missed by
mechanical cleaning and leads to
rapid refouling.
-
Removes any foreign scale
deposit.
-
Environmental safety - No
chemical discharges or hazardous
waste removal.
-
Custom designed cleaning
nozzles, which offer full 360°
inner diameter cleaning without
streaking tube.
-
Multiple lance systems -
up to 8 (or more) operators for
fast cleaning of large main
condensers.
-
Radiological waste
minimization with the use of our
positive shut off pressure
control systems.
-
Cost Effective - restored
baseline performance and
extended refouling rates;
promptly recovers job expense
(in exponential fashion).
Tube cleaning
is the process for cleaning and
maintaining fouled tubes. Chemical
tube cleaning is required to remove
deposits and obstructions, which are
caused by the liquids, which run
through the tubing. The chemical
tube cleaning process can help
prevent corrosion due to deposits,
which can also create tube failure.
High pressure water jet tube
& pipe cleaning is widely
used in various industries like
textile, pharma, steel, chemical,
refineries & many other industries
for different applications.
PressureJet has
supplied many such high pressure
waterjet tube cleaning & pipe
cleaning systems, condensor tube
cleaning systems, boiler tube
cleaning systems in different
industries in all over India & other
countries like South Africa,
Malaysia, Philippines, Thailand,
Korea, Iran, Saudi Arabia, Brazil,
Mexico, Israel, Indonesia & many
more
However, you
please go through the below
mentioned chart where you will come
to know about the different range of
flow rate, pressure and hp of
different high pressure water jet
tube cleaning system.
IMPORTANT ACCESSORIES FOR PIPE & TUBE CLEANING SYSTEM
PressureJet offers following specifically designed pipe & tube cleaning accessories
- Different types of conventional tube & pipe cleaning nozzles for forward firing, backward firing, radial firing & any combinations of this.
- Rotating tube cleaning nozzles
- High pressure flexible lance
- High pressure waterjet rubber hose
- Foot operated valve
- Pneumatically controlled flexible lance operating system
- Automatic lancing machine with rigid lance
- Telescopic Positioning device
- Centralisers
- Lancing Rails
- Single, dual & triple lancing systems
- Hose catcher anti-withdrawal device
- Line mole backout preventers