For technical
and sanitary reasons, sewer jetting
machines are frequently cleaned.
Particularly, the blocking of the cross
sections as well as odor problems need to be
avoided. Also, damages at the channel walls
must be recognized very early, which is only
possible, if the walls are completely clean.
Further, inorganic deposits that reduce the
sewage treatment efficiency must be
removed.
Sewer jetting / drain
jetting / gutter cleaning is
the process of using sewer jetting
machines to bring a sewer drain line
back to like-new condition without having to
actually replace the line. This is very
cost-effective practice, as well as a nearly
effortless task- especially for drain
jetting that are heavily used, even for
grease. (You aren't supposed to be dumping
that down there in the first place!).
Anyone, who has
ever had to deal with a sewer or even
residential septic tank, knows all about
clogs and back-ups. Soap scum residue,
grease, hair, food, mineral deposits and
more can all cause a drain to back up. As
much as people try to be careful with what
they send down the tube, it is almost
inevitable that these things will at some
time pass through eventually causing clogs.
Even as careful as you are with grease- you
may not directly dump it down the drain- but
the remaining grease on pots, pans and
plates can cause a film that over the years
can build up and solidify. Sometimes a
simple unclogging could do but after masses
of build-up and too frequent blockages,
perhaps a good sewerjetters would be a more
effective method that will also last plenty
longer.
Pressure Jet's
high pressure drain jetters equipments,
drain jetting are completely suitable
to achieve all above cleaning results,
because these pumps are rugged in
construction, have medium speed and perform
to the entire satisfaction of the customer.
There are
special drain jetting machines ,
designed specifically for this purpose,
called sewer jetters. They can clean
the pipes leading from sinks and bathtubs
leading to the tanks, even those at long
distances, which is especially helpful in
the case of industrial piping. The
sewerjetters work at a high pressure,
between 150-300 bar and 12-400 lpm. The
pressure can be adjusted throughout the job
as needed. These sewer jetting machines
use a special nozzle that gets down into the
drains to loosen and cuts the clogged
materials that are obstructing the pathways.
This essentially scours the pipes clean and
then washes the debris back up to be
removed, usually through a vacuum pump.
These kinds of
systems are successfully running in
different municipal corporations.
WHAT SIZE SEWER CLEANING HOSE DO I USE?
- 2" - 6"
pipe lines use 1/4" size drain jetting
hose
- 5" - 10"
pipe lines use 3/8" size sewer cleaning
hose
- 8" - 12"
pipe lines use ½" size sewer
jetting hose
- 10" or
larger pipe lines use ¾" size
sewer blasting hose. Important
Accessories for sewer jetting system
PRESSUREJET OFFERS FOLLOWING SPECIFICALLY
DESIGNED SEWER CLEANING ACCESSORIES
-
Different types of specially designed
drain cleaning nozzles
- High
pressure sewer jetting hose
- Foot
operated valve
- Hose
reel
-
Hydraulic hose reel
- Camera
|
