|
Industrial
high pressure cleaners are a
high pressure reciprocating plunger
pump that uses high pressure
water jet to remove mold, grime,
dust, mud and dirt from surfaces and
objects such as buildings, vehicles
and concrete road surfaces. High
pressure cleaners are also known
as power pressure washer.
High pressure
cleaners direct a
high-pressure stream or jet of
water against a surface to clean,
descale, degrease or prepare a
surface. Pressure washers may
use either cold water or hot water
and steam to perform their function,
and the water is often mixed with
various cleansers, detergents or
solvents. They are used for
surface
cleaning, or for the
demolition of products made of
metal, wood, concrete, stone,
plastic, glass or other building
materials.
High pressure
cleaners are available as
complete machines or systems, or
they can be purchased in component
form and built from the ground up,
or to replace worn out parts. water
blast wheel, and water storage
tank.
The gun or lance
directs the stream fluid through a
nozzle and at the appropriate region
of the work piece. Some water
pressure cleaners have wear
resistant nozzles and optional
abrasive injectors to provide
wet
sandblasting
capability. PressureJet also offers
hot water
pressure washer.
Several different types of
nozzles are available, each useful
for a particular application. Some
nozzles cause the water jet
to be ejected in a triangular plane,
while others emit a pencil-thin jet
of water, which spirals around
rapidly. Most nozzles attach
directly to the trigger gun.
Some high pressure cleaners,
in combination with a particular
nozzle, allow detergent to be
introduced into the water stream,
assisting in the cleaning process.
Two types of chemical injectors are
available: a low-pressure injector
and a high pressure injector.
The pumping unit
is the pressure generator used to
force out the carrier fluid at high
velocity. Plunger-type high
pressure cleaners pumps are
commonly used to generate high
pressure water for water jet
cleaning and wet or water
abrasive blasting for non-abrasive
pressure cleaners or rinsing.
Crankshaft driven plunger pumps are
commonly used for pressure
generation. Crankshaft driven
plunger pumps may be more efficient
in electrical energy costs compared
to intensifiers. Crankshaft driven
plunger pumps also provide a
virtually ripple free pressure
source in comparison to
intensifiers. Dust collection or
filtration systems remove fine
particle sizes of abrasive, swarf,
grease or other blasting waste
(removed scale or stock in the form
of dust or fine swarf) that would
otherwise contaminate the
environment.
Water tanks or
hoppers are used by water high
pressure cleaners for the
storage of dry abrasive grains,
blasting media or abrasive-water
slurry mixtures.
THE MOST BASIC HIGH PRESSURE
CLEANERS CONSISTS OF:
-
A motor/engine
-
High pressure hose
-
Trigger operated gun
-
Unloader Valve
-
Lances
-
Nozzles
-
Pressurerelief valve
-
Pressure gauge
Electric
pressure power washers
l
Gas pressure
power washers
l
Diesel
pressure power washers
Hydraulic
pressure power washers l
Honda pressure
power washers
|
