|
Paint Removal using
a pressure washer and/or
sand blaster configuration and
combination of either light, medium
and heavy specialty equipment, can
prove to be highly effective and
lucrative, cost-effective and a
time-and-money saver.
It is applicable and appropriate for
a variety of tasks and projects in
and around your house, business,
property and structures. Pressure
washers and sand blasting equipment,
will save you time and money,
particularly on large projects and
remodeling of scale. Whether you are
doing deck, wall or other painted
surface, paint removal, priming and
cleaning will never be easier.
With this specialty equipment at
your disposal, high-pressure,
blasting tools can let you do way
more than you could by hand.
Paint removal at any given point
in time, is no joke. It requires
persistence and effort, elbow-grease
and hours of labor, no doubt about
it. Now, paint removal using
pressure washer and sand blaster is
reliable, affordable and within your
easy reach. We source and supply
solutions and answers to any paint
removal challenge.
There are many reasons and rationale
that can be put forward to argue and
advocate for the use of pressure
washers and sand blasters for paint
removal. Here are but a few:
-
Rotating or
rotary nozzles just enables you
to do so much more.
-
Ordinary
pressure turns into powerful
scrubbing power utilizing a
propelling jet stream of
rotating water to blast through
even layers of paint!
-
Chores of
this nature become a breeze as
pressure washer and/or
sand-blasting equipment enable
cleaning processes and projects
that involve large, flat
surfaces with relative ease and
powerful effectiveness.
-
High-speed
rotation makes it possible to
let you make progress with the
job quickly and clear/clear a
wide area in a relative short
period of time.
-
Increased
efficiency and cleaning at your
fingertips and within easy reach
To remove paint from surfaces
nothing beats the speed and
thoroughness of a pressure washer
and sand blaster. Paint
removal can be an arduous task by
hand, especially if you need to
remove paint from large surfaces
such as industrial buildings,
graffiti from bridges and large
walls, or other surfaces. That is
why using a pressure washer, sand
blaster combo is so economical. It
saves time and in the long run
money. Here are a few things you
should know before you begin.
-
Paint removal
with a heat gun, scraping or by
hand is immensely
time-consuming, and chemical
removers are pungent and takes
equally as long to work well,
with some projects even
requiring some additional
application or more work to get
to a point where you are ready
to prime and paint.
-
Pick the
right pressure washer and sand
blasting equipment for the
nature and scope of your
project.
-
Protect
yourself and the surrounding
areas that you are not working
on from damage or injury. You
would not want flying particles
to go everywhere it should not.
Windows and glass surfaces
should also be protected and
covered. Flyaway sand and paint
can corrode, even break glass
and other surfaces. There is a
variety of materials you can use
for this purpose including
tarps, plastic sheeting, oil
paper, and water resistant tape.
-
Ensure that
you have the proper nozzles,
gauges, hoses, and sand type for
your type of job, project or
task at hand.
-
Prepare and
ready your equipment. Adjust and
test the pressure washer/sand
blasting tools, do a dry run to
ensure efficient, smooth and
functional operation.
-
In addition,
test the water speed, sand flow,
angle and distance set a piece
of metal or object similar to
what you will remove the paint
from and stand at a reasonable
distance from it. Adjust the
water speed and sand flow
according to the removal, and
then sample different angles and
distances until you get the
desired result for your project.
|
